IGNITION/LIGHT SWITCH
Off
On/Light
On
Start
Figure 5
The ignition/light switch is located on the Right Control Panel and is used to start the engine. It is a four position switch.
•In the OFF position the engine is not running. (See Figure 5)
•In the ON/LlGHT position the engine is running and the Head Light is on.
•In the ON position the engine is running and the head light is off.
•In the START position the starter is engaged to the engine flywheel.
LIFT HANDLE
Height Positions
1 through 7 and L (lock)
Button
7
6
5
4
3
2
1 L
Figure 6
The Lift Handle is located on the right fender. It raises and lowers the cutting height of the mower deck used by the
•1 through 7 (1 - lowest height, 7 - highest height)
•L is the lock out position. The lock position is used when removing the mower deck.
The Choke Lever is located on the Left Control Panel. (See Figure 7) The Choke Lever is operated manually. Having the Choke Lever in the ON position helps the engine to start during initial
The Throttle Lever is also located on the Left Control Panel and it is used to regulate the engine speed. To get maximum efficiency from cutting, the throttle should be in the FAST position when operating the mower.
(See Figure 7)
8