CHECKING THE HYDRAULIC OIL
| Release Bar |
| Hydraulic Fill Point |
Hydraulic Fill Plug/ | |
Dipstick |
|
Knurled Area = | Operating |
| Range |
Figure 15
1.Flip seat up. (See Figure 15)
2.Clean the area around the Hydraulic Oil Dipstick to prevent debris from entering the crankcase.
3.Wipe clean and fully insert the fill plug/dipstick (screw in).
4.Remove the hydraulic fill plug/dipstick and read the level:
If hydraulic oil level is: | Then: |
|
|
Inside operating range | Do nothing. |
|
|
Below operating range | Add hydraulic oil before operating. |
| Check for leaks. |
|
|
Above operating range | Drain excess oil before operating. |
|
|
5. Reinstall the dipstick completely into the fill tube.
WARNING: Never check for hydraulic leaks with your bare hand. Always use a rag.
26
