White Outdoor ZT-1850, ZT-2150, ZT-2250 Know Your Z-SERIES, Ignition/Light Switch, Hour Meter

SECTION 3: KNOW YOUR Z-SERIES

NOTE: Reference to right or left hand side of the mower is observed from the operating position.

Throttle Lever And	Drive Handles
Choke Lever	Indicator Panel
	Brake
	Pedal
	Parking
	Brake Pedal
	Speed Control Bar
Lift Handle
	Right Control
	Panel

Figure 1

Read this operator’s manual and safety rules before operating your Z-Series. Compare the illustrations in this manual with your unit to familiarize yourself with the location of various controls and adjustments. Reference to right or left hand side of the unit is observed from the operating position. Save this manual for future reference. See Figure 1.

Ignition/Light Switch

The ignition/light switch is located on the right control panel and it is used to start the engine. Insert key into the ignition switch and turn clockwise to the START position. Release key to the ON position once engine has fired.The ignition switch is also used to operate the headlights when the switch is in the ON/LIGHT position. See Figure 1 and Figure 2.

Hour Meter

The hour meter is located on the right control panel and the meter’s display stays on continuously. The hour value is the number of hours of engine’s operation. Use the hour value to determine when maintenance is required. See Figure 1 and Figure 2.

PTO Switch

Start

On

Ignition/Light Switch

On/

Light

Off

Hour Meter

Front

Figure 2

7