White Outdoor ZT-1850, ZT-2150, ZT-2250 manual Throttle Lever and Choke Lever, Lift Handle

Electric PTO (Power Take-Off) Knob

The PTO switch is located on the right control panel and it is used to control the engagement of the cutting blades. When the knob is up, the cutting blades are engaged. When the knob is down, the cutting blades are disengaged. See Figure 1 and Figure 2.

NOTE: The PTO knob must be in the disengaged (OFF) position when starting the engine, when shifting into reverse, and when the operator leaves the seat.

Throttle Lever and Choke Lever

The choke lever is located on the left control panel. Activating the choke control closes the choke plate on the carburetor and aids in starting the engine during initial or cold engine start-up. During normal operation the choke lever should be in the OFF position. Push the lever forward to turn choke on and pull choke lever back to turn choke off. See Figure 1 and Figure 3.

The throttle lever is also located on the left control panel and it is used to regulate the engine speed. To get maximum efficiency from cutting, the throttle should be in the FAST position when operating the mower. Push the throttle lever forward for faster engine speed and pull lever back for slower engine speed. See Figure 3.

Front

Seat Adjustment

Lever

Figure 4

Lift Handle

The lift handle is located on the right fender and it raises and lowers the cutting height of the mower deck. The height positions are one through seven and the L is the lock position. The lock position is used when removing the mower deck. See Figure 1 and Figure 5.

7	Button
	6
	5
	4
	3
	2

Throttle Lever

Fast

ON

Choke

Lever

OFF

Height	1
	L
Positions

Figure 5

Indicator Panel

The indicator panel is located at the top of the control tower. See Figure 1 and Figure 6. When the corre- sponding light is illuminated it indicates:

Figure 3

Seat Adjustment Lever

The seat adjustment lever is located beneath the seat and it is used to move the seat forward and backward. See Figure 4.

•Pull up on the seat adjustment lever and push the seat forward or back to the desired position.

•Release the seat adjustment lever so that it locks the seat in place.

WARNING: Do not try to adjust the seat position while operating the Z-Series.

Low	Battery
Engine Oil

Figure 6

•Low Engine Oil: Stop the tractor immediately and check the engine oil level. Continuing to operate with low engine oil can severely damage the

engine.

8