INSTALLER/CONFIGURATION MENU

6)Select Compressor Lockout CL OFF or ON - Selecting CL On will cause the thermostat to wait 5 minutes between cooling cycles. This is intended to help protect the compressor from short cycling. Some newer compressors already have a time delay built in and do not require this feature. Your compressor manufacturer can tell you if the lockout feature is already present in their system. When the thermostat compressor time delay occurs, it will flash the setpoint for up to five minutes.

7)Select Backlight Display - The display backlight improves display contrast in low lighting conditions. When the “C” terminal is connected, selecting backlight CdL On will keep the light on continuously. Select backlight OFF will turn the light on momentarily when any key is pressed. When the “C” terminal is not connected, regardless of the backlight selection, the light will be on momentarily when any key is pressed.

8)Select Temperature Display Adjustment 4 LO to 4 HI - Allows you to adjust the room temperature display up to 4° higher or lower. Your thermostat was accurately calibrated at the factory but you have the option to change the display temperature to match your previous thermostat. The current or adjusted room temperature will be displayed on the display.

9)Select F° or C° Readout - Changes the display readout to Celsius or Fahrenheit as required.

10)Select Filter Replacement Reminder and Set Run Time Select the “Change Filter” reminder On or OFF. If selected On, press RUN/HOLD to select the time period from 25 to 1975 hours in 25 hour increments. In a typical application, 200 hours (default) of run time is approximately 30 days. After the selected time of blower operation, the thermostat will display “Change Filter” as a reminder to change or clean your air filter. When “Change Filter” is displayed, press the RUN/HOLD button to clear the display and restart the time to the next filter change. A selection of OFF will cancel this feature.

OPERATION

CHECK THERMOSTAT OPERATION

If at any time during testing your system does not operate properly, contact a qualified service person.

Turn on power to the system.

Fan Operation

If your system does not have a G terminal connection, skip to Heating System.

1.Move fan switch to ON position. The blower should begin to operate.

2.Move fan switch to AUTO position. The blower should stop immediately.

Heating System

1.Move SYSTEM switch to HEAT position. If the auxiliary heating system has a standing pilot, be sure to light it.

2.Press to adjust thermostat setting to 1° above room temperature. The system should begin to operate.

3.Press to adjust temperature setting below room temperature. The heating system should stop operating.

Cooling System

!CAUTION

To prevent compressor and/or property damage, if the outdoor temperature is below 50oF, DO NOT operate the cooling system.

1.Move SYSTEM switch to COOL position.

2.Press to adjust thermostat setting below room temperature. The blower should come on immediately on high speed, followed by cold air circulation. However, if the setpoint temperature is flashing, the compressor lockout feature is operating (see Configuration menu, item 6).

3.Press to adjust temperature setting above room temperature. The cooling system should stop operating.

!CAUTION

Do not allow the compressor to run unless the compressor oil heaters have been operational for 6 hours and the system has not been operational for at least 5 minutes.

MANUAL OPERATION

•HOLD TEMPERATURE — With the SYSTEM switch set

to HEAT or COOL, momentarily press RUN/HOLD button.

HOLD will be displayed. Use or to adjust the temperature.The thermostat will hold the room temperature at the selected setting until you press RUN/HOLD button to start program operation again.

•TEMPERATURE OVERRIDE (TEMPORARY HOLD) —

Press or until the temperature you want is displayed. The thermostat will override current programming and keep the room temperature at the selected temperature for 2 hours or until the next program period begins. Then the thermostat will automatically revert to the program.

6

Page 5 Page 7
Page 6
Image 6
White Rodgers 1F80-0224 specifications Check Thermostat Operation, Manual Operation
Page 5 Page 7

1F80-0224 specifications

The White Rodgers 1F80-0224 is a high-efficiency programmable thermostat designed to provide homeowners with both comfort and energy savings. This device stands out in the market due to its easy-to-use interface and a plethora of advanced features that cater to modern heating and cooling systems.

One of the standout features of the 1F80-0224 is its large, backlit display. This makes it easy to read the temperature and programming settings, even in low light conditions. Users can effortlessly navigate through the thermostat’s functions with intuitive on-screen prompts, which greatly enhances the user experience.

The 1F80-0224 operates on a 7-day programming schedule, allowing users to create personalized heating and cooling programs for each day of the week. This flexibility helps in optimizing energy use when the home is occupied and reducing energy consumption when it is unoccupied. Additionally, it supports multiple programming options, including a 5-2 day schedule, making it suitable for various lifestyles and preferences.

Energy efficiency is a significant benefit of this thermostat. It includes features that help homeowners monitor and manage their energy consumption effectively. For instance, it presents energy usage reports that allow users to track their heating and cooling patterns over time. This valuable information aids in making informed decisions regarding energy use, promoting a greener lifestyle.

The 1F80-0224 also comes with an auto changeover feature, which enables it to switch between heating and cooling modes automatically based on the indoor temperature. This eliminates the hassle of manually adjusting the thermostat when seasonal changes occur or when the internal environment shifts.

Compatibility is another key attribute of this thermostat. It works with various HVAC systems, making it a versatile choice for many households. Whether you have a gas, electric, or heat pump system, the 1F80-0224 can seamlessly integrate, ensuring optimal performance.

In addition to its technical features, the 1F80-0224 is built with user convenience in mind. It includes easy installation instructions, and users can benefit from battery backup, ensuring temperature control is maintained even in case of power outages.

In summary, the White Rodgers 1F80-0224 programmable thermostat is designed for those who seek a blend of comfort, efficiency, and modern technology. Its advanced features, such as a large backlit display, 7-day programming, auto changeover, and compatibility with various HVAC systems, make it an ideal choice for enhancing any home environment while helping to reduce energy costs.
Top Page Image Contents