PROGRAMMING
7.Repeat steps 3 through 5 for the 3rd and 4th heating program periods.
8.When you have completed entering your heating program, press RUN/HOLD.
!CAUTION
If the outside temperature is below 50oF, disconnect power to the cooling system before programming. Energizing the air conditioner compressor during cold weather may cause personal injury or property damage.
Enter Cooling Program
1.Move SYSTEM switch to COOL position.
2.Follow Enter Heating Program for entering your cooling program, using your selected cooling times and temperatures.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one final time before beginning thermostat operation.
1.Move SYSTEM switch to HEAT position.
2.Press PRGM to view the 1st weekday heating period time and temperature. Each time you press PRGM, the next heating period time and temperature will be displayed in sequence for weekday, then Saturday and Sunday program periods (you may change any time or temperature during this procedure).
3.Press RUN/HOLD.
4.Move SYSTEM switch to COOL position.
5.Repeat step 2 to check cooling program.
6.Move SYSTEM switch to HEAT or COOL and press RUN/ HOLD to begin program operation.
YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
8
