PROGRAMMING
4.Press TIME once (the programmed time will flash). Press
or 
until your selected time appears. The time will change in 15 minute increments. When your selected time is displayed, press TIME again to return to the change temperature mode.
5.Press PRGM once. The currently programmed start time and setpoint temperature for the 2nd heating program period will appear.
6.Repeat steps 3 and 4 to select the start time and heating temperature for the 2nd heating program period.
7.Repeat steps 3 through 5 for the 3rd and 4th heating program periods.
8.Press PRGM once. “TU” (indicating Tuesday program) will appear in the display, along with the start time for the 1st heating period and the currently programmed temperature.
9.Repeat steps 3 through 8 to complete heating programming for all periods each day.
10.When you have completed entering your heating program, press RUN/HOLD.
Enter Cooling Program
!CAUTION
If the outside temperature is below 50oF, disconnect power to the cooling system before programming. Energizing the air conditioner compressor during cold weather may cause personal injury or property damage.
1.Move SYSTEM switch to COOL position.
2.Follow Enter Heating Program for entering your cooling program, using your selected cooling times and temperatures.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one final time before beginning thermostat operation.
1.Move SYSTEM switch to HEAT position.
2.Press PRGM to view the 1st heating period time and temperature for Monday. Each time you press PRGM, the next heating period time and temperature will be displayed in sequence for each day, (you may change any time or temperature during this procedure).
3.Press RUN/HOLD.
4.Move SYSTEM switch to COOL position.
5.Repeat step 2 to check cooling program.
6.Move SYSTEM switch to HEAT or COOL and press RUN/ HOLD to begin program operation.
YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
8
