ENTERING YOUR PROGRAM
Follow these steps to enter the heating and cooling programs you have selected.
NOTE
We recommend that you remove the thermo- stat from the wall for programming (especially for entering cooling programming). A fresh 9 volt Energizer® alkaline battery must be in- stalled to perform
SURE SYSTEM SWITCH IS SET TO OFF POSITION BEFORE REATTACHING THER- MOSTAT TO SUBBASE!
NOTE
You cannot program the thermostat with the SYSTEM SWITCH in the AUTO position.
Set Current Time and Day
1. Press SET once. The display will show
CLOCK
minutes only.
EXAMPLE:
2.Press and hold either TIMEFWD or BACKTIME until you reach the correct minutes.
3.Press CLOCKSET once. The display window will show the hour only.
EXAMPLE:
4.Press and hold either TIMEFWD or BACKTIME until you
reach the correct hour and AM/PM desig- nation (AM begins at midnight; PM begins at noon).
23
