This display window shows that for the weekday MOR period, the start time is 5:00 AM, and 70° is the programmed tempera- ture (this example reflects factory prepro- gramming).
3.To change the displayed start time to your selected start time for weekday MOR heat
program, press TIMEFWD or BACKTIME until your se-
lected time appears. The time will change in 15 minute increments.
4.Press 
or 
until you reach your selected weekday MOR heating tem- perature.
5.If you want the fan to run continuously
during | this period, press | FAN | until | |
SWITCH | ||||
FAN |
| is displayed. |
|
|
|
|
| ||
|
|
| ||
6.Press PRGMVIEW . The currently programmed start
time and heating temperature for weekday DAY will be displayed.
7.Repeat steps 3 through 5 to select the start time and heating temperature for the week- day DAY program.
8.Repeat steps 3 through 7 for the weekday EVE and NHT heating programs.
9.After entering your weekday heating pro- gram, repeat steps 1 through 8 for your weekend programming (keep in mind that for weekend programming, the display should be changed from 5 DAY to 2 DAY).
10.When you have completed entering your heating program, press PRGMRUN .
25
