White Rodgers 1F91-71 manual Check Your Programming, Enter Cooling Program

Enter Cooling Program

!CAUTION

If outside temperature is below 50°F, we recommend that you remove the ther- mostat from the wall before proceeding with the following steps to program cool- ing temperatures. Personal injury or property damage may occur due to air conditioner compressor slugging. A fresh 9 volt Energizer® alkaline battery must be installed to perform off-wall programming. Programming away from the wall should prevent accidental com- pressor operation. BE SURE SYSTEM SWITCH IS SET TO OFF POSITION BE- FORE REATTACHING THE THERMO- STAT TO THE SUBBASE!

1. Press	SYSTEM	until COOL appears.
	SWITCH

2.Enter your cooling program by following the procedure for entering your heating program.

CHECK YOUR PROGRAMMING

Follow these steps to check your thermostat programming one final time before beginning thermostat operation.

1. Press	SYSTEM	until HEAT is displayed.
	SWITCH

2.Press and hold PRGMVIEW to view the heating

period times and temperatures in se- quence for weekday MOR, DAY, EVE, and NHT, then for weekend MOR, DAY, EVE, and NHT.

26