Permanent Temperature Hold, Non-Programmable Mode

Permanent Temperature Hold

Non-Programmable Mode

Maintenance Reminder Message

USAGE GUIDE

The Permanent Temperature Hold feature bypasses the program and allows you to permanently hold a temperature. The temperature you set in Hold will

be maintained indefinitely. Touch Run Schedule to cancel Hold and resume the programmed schedule.

Touch or keys to adjust the tem- perature. The Hold key will appear on the screen. Touch the Hold key to maintain the new setpoint temperature. “Hold At” will display to the left of the setpoint temperature. To cancel the permanent hold setting at any time and return to the program, touch Run Schedule.

Example: If you turn up the heat during the Morning program and touch the Hold key, it will remain at the new temperature until you touch Run Schedule or you manually adjust to another temperature.

Choose the FAN Setting (Auto or On)

FAN Auto is the most commonly select- ed setting and runs the fan automatically when the heating or cooling system is .

FAN On selection runs the fan continu- ously for increased air circulation or to allow additional air cleaning.

If Program days per week is set for 0 days (Non-programmable) in the Ther- mostat Options Configuration Menu, the thermostat will not follow any program periods. Time of day and day of week will not display. Touch the SYSTEM key to select Heat or Cool and use the or buttons to adjust the temperature to your desired setting.

Auto Mode

In Programmable mode or Non-program- mable mode, you can touch the SYSTEM key to select Auto to allow the thermo- stat to automatically change between Heat and Cool. When the SYSTEM key is touched to select Auto the thermostat will change to Heat or Cool, whichever ran last. If it switches to heat but you want cool, or it changes to cool but you want heat, touch both or keys simultaneously to change to the other mode.

A reminder will display in the scrolling message area when it is time for ac- cessory maintenance if selected in the Thermostat Options Configuration Menu. When a reminder appears, it can be cleared by touching the Clean Display key. This will also reset the timer to begin a new time period for the reminder.

Maintenance reminders are: