White Rodgers 37-6753B specifications Thermostat Quick Reference, Home Screen Description

Set Temperature

Temperature UP/Down used for modifying set point as well as to navigating the menus

Enters comfort temperature settings into the schedule

Menu key for entering different modes such as Cleaning, Configuration, Set

Battery Level IndicatorTime and Set Schedule Indicating the current power level

of the 2 “AA” batteries. Full power remaining.

Half power remaining.

Change The batteries should be replaced at this time.

Figure 3 – Programming & Configuration Items

Room Temperature

THERMOSTAT QUICK REFERENCE

Home Screen Description

Time of Day

System

Switch

Fan

Switch

Figure 2 – Home Screen Display

Day of Week

Indicates when thermostat is calling for Heat or Cool

Programming and Configuration Items

1Displays and "Keypad Lockout" when in keypad lockout mode.

Displays and "Temperature Limit" and "Keypad Lockout" when limited range is activated and locked. Displays only "Temperature Limit" when limited range is activated.

2Indicates period of day being programmed.

3RUN SCHEDULE (run program) button.

4SET TIME button or HOLD temperature button.

5Displays "Change Filter" when the system has run for the programmed filter time period as a reminder to change or clean your filter.

6COPY button or INSTALLER CONFIG button.

7CLEAN DISPLAY button allows 30 seconds to wipe off the display or ADVANCE DAY button for programming.

8Used in programming to set time and in configuration menu to change selections.

9"Hold Until" indicates the time when a temporary hold period will end.

10"Hours" and "Days" displays during steps in installer configuration.

11The words "Hold At" are displayed when the thermo- stat is in the HOLD mode. "Temporary Hold At" is displayed when the thermostat is in a temporary HOLD mode.

12"Call For Service" indicates a fault in the heating/ cooling system. It does not indicate a fault in the thermostat.

16	10		11
9
8				1
	14	13	15	2
				12
				3
	7	6	5	4

13"System On" indicates when heating or cooling stage is energized. "+2" also indicates when a second stage is energized.

14"Copy" indicates the copy program feature is being used during programming.

15A steady "Cool Savings" display indicates the feature is enabled in the installer menu. A flashing "Cool Savings" display indicates the feature is active.

16"Remote" indicates that the indoor remote temperature sensor, is being accessed. "Outdoor Remote" indi- cates the outdoor remote temperature sensor is being accessed.

3