day you wish to change and follow Steps 10, 11 & 12. You can also copy the program from one day to another. To copy, press HOLD /COPY. The display will show COPY, and all the other days of week will be flashing. Press HOLD /COPY again to copy the day into the rest of the week or press TIME FWD or TIME BACK until you reach the day you want to copy to and press HOLD /COPY.
10.Press TIME FWD or TIME BACK to set the time on the display as selected in your HEATING or COOLING SCHEDULE. Be sure to check the AM or PM on the display.
11.Press the red 
or blue 
key to adjust the temperature to match your schedule. If you want the fan ON continuously during this period, press
FAN .
12.Press PROGRAM VIEW one time. OCCU on the display will change to
UNOC. Repeat steps 10 and 11 to enter time and temperature for this period.
13.Press PROGRAM ADV. to change MON to TUE and show the OCCU time and temperature settings. Repeat steps 10 through 12 to enter times and temperatures for this day.
14.Continue through the entire schedule, entering time and tempera- ture for each day and period. When you are satisfied that your program matches your schedule, press PRO- GRAM RUN . Programming is now complete for this mode and your program is running.
15.To program the other mode, repeat the procedure from step 7.
8
