PROGRAMMING
MANUAL OPERATION
Your
PROGRAM HOLD . Use 
or 
to set the temperature as
desired.
PROGRAMMED OPERATION Planning Your Program
The sample schedule (page 9) shows the factory installed programs for heating and cooling. The heating and cooling programs are separate, and must be programmed individually. To use the factory program, set the clock and press PROGRAM RUN with the thermostat SYSTEM set to Heat, Cool, or Auto.
Fill out the blank schedule (page 10) with the time and temperatures you want in your program. Fill in every space for your program.
The same temperature can be repeated more than once if you do not want the temperature to change over several time periods.
Entering Your Program
To Set the Clock:
1.Press PROGRAM RUN .
2.Press SET TIME . The display will show the hour. Use TIME FWD or TIME BACK to set to the current hour and AM/PM designation.
3.Press SET TIME again. The display will show minutes. Use TIME
FWD or TIME BACK to set to the current minutes.
4.Press PROGRAM RUN .
7
To Set the Day:
5. Press SET DAY . The display will indicate a day of the week. Use TIME
FWD or TIME BACK to set to the current day of the week.
6.Press PROGRAM RUN .
To Set the Program:
7.Press SYSTEM to select HEAT (for heating program) or COOL (for cooling program).
8.Press PROGRAM VIEW one time. The display will show OCCU and the settings for time and temperature. The display will also show MON for Monday.
9.If you program Monday the first time you press PROGRAM VIEW it will be copied to the rest of the week. To program the other days of the week
press ADV. /DAY until you reach the
Programming
