CONFIGURATION
The configuration menus allow you to set certain thermostat operating characteristics to your system or personal requirements.
To enter the User Configuration menu, press PROGRAM RUN to make sure the thermostat is in the run program mode, then press TIME FWD and TIME BACK at the same time. The display will show the first item in the configuration menu.
The following charts (pages 5 & 6) describe each item on the menus. Press TIME FWD to move forward to the next item in the menu or TIME BACK to move backward to the previous item. Set these according to your
personal preference using 
or
. To enter the Keypad Lock menu, while in the User Menu, press and hold TIME FWD and TIME
BACK for at least two seconds.
To exit either menu and return to normal operation, press PROGRAM
RUN . To
4
