4.3 Bypass the schedule
(permanent hold)
You can manually override the
1.Use the buttons to raise or lower the desired temperature.
2.When the desired temperature is displayed, press the HOLD button. “HOLD” will be displayed at the bottom of the screen.
3.The override will last until you cancel it. Cancel the override by pressing the RUN button.
4.4 Set change filter reminder
The thermostat can display a reminder when it is time to change the air filter on your heating and cooling system.
To enable Change Filter reminder:
1.Press the PRGM and RUN buttons simultaneously.
2.Press the HOLD button four (4) times until you see FLTR in the display.
3.Using the buttons select the number of hours until you would like to be reminded of the filter change. The hours increase in increments of 50.
4.Press RUN when you are finished.
5.Once the set time has elapsed, FLTR will be displayed on the screen.
6.Reset the reminder by pressing the HOLD and RUN buttons simultaneously.
20 | 21 |