White Rodgers UP400 installation instructions Select options

3.3 Select options

Press the MENU icon and then press the MORE OPTIONS icon.

You will be prompted to answer 10 “Options” questions, shown below. As each option is presented:

✔Use the to answer each question.

✔Use the MORE OPTIONSŒicon to advance to the next question.

Options		Default Setting	Additional Information
1.	Do you want the	OFF	Select default OFF for now.
	keypad lock	(no key lockup)	To lock the keypad, see
	turned on or off?		Additional Functions
			section 4.8.
2.	Do you want to be	ON	Select default ON for now.
	reminded when it	(13 weeks)	To modify a filter-change
	is time to change		reminder, see Additional
	the air filter?		Features section 4.9.
3.	Do you want to be	OFF	Select default OFF for now.
	reminded when it	(no reminder)	To set a pad-change
	is time to change		reminder, see Additional
	the Humidifier Pad?		Features section 4.10.
4.	Do you want the	ON	Select default ON for
	thermostat to work	(programmable)	Programmable Mode.
	in Programmable		Select OFF to operate in
	Mode?		Non-Programmable Mode.

It you select OFF, your thermostat will work as a non-programmable unit. The clock and date will not be displayed.

Some functions, identified by in this manual, are available only in Programmable Mode.

Options	Default Setting	Additional Information
5. Does either a gas	GAS	Select GAS if you have
or oil furnace	(for either gas or	either a gas or oil furnace.
provide heating to	oil furnace)	If you do not have a
your home?		gas or oil furnace select ELE.
6. Do you have a	OFF	If you do not have a
Heat Pump?	(no Heat Pump)	Heat Pump select OFF.
		If you have a Heat Pump,
		use the to select (On1)
		for a 1-stage, or (On2)
		for a 2-stage Heat Pump

To determine if you have a Heat Pump and/or whether it is a 1-stage or 2-stage model, see the Appendix at the end of manual.

7. Do you want the	FA (fast)	Select SL (slow) if you
Cycle Rate to be		have Hydronic (water or
Fast or Slow?		steam) Heating.
		Otherwise, select default FA.
8. Do you want to	OFF (no Auto	Select default OFF for
activate Auto	Changeover)	now. To set the function,
Changeover		see Additional Functions
function?		Section 4.11.
9. Do you want	°F
temperature	(Fahrenheit)
displayed in °C
(Celsius) or °F
(Fahrenheit)?
10. How much	0	Select default 0 for now.
displayed	(no offset)	To adjust the displayed
temperature offset		temperature reading, see
do you want?		Additional Functions
		Section 4.12.

When you have answered all 10 questions, press the DONE icon twice.

14 15