10. COOLING MODE
In cooling mode, you can use the remote control and the unit’s control panel to adjust the following :
-temperature
-fan speed (Low, med, high, auto)
-airflow direction
1.Press the ON/OFF button on the remote control or on the unit’s control panel to start the air conditioner.
2.Press the MODE button repeatedly until the cooling mode icon ( 
) is displayed in the upper left corner of the remote control and at the top of the unit’s control panel display.
3.Press the fan speed adjustment button ( ) and select the desired speed (low, med, high, auto).
4.To adjust the temperature, press the WARMER/COOLER buttons until the targeted temperature is displayed. The available temperature range is between 64 °F and 87 °F.
Each time you press a WARMER/COOLER button, the temperature is adjusted by 1 °F.
5.The air conditioner starts cooling, provided that the room temperature is higher than the selected target temperature.
Note:
-If the room temperature is lower than 64 °F, the air conditioner will not allow the compressor to operate in cooling mode.
-If the room temperature is too low and the room humidity is too high, frost or ice can form on the surface of the evaporator. However, the air conditioner is
Caution:
Set a reasonable temperature to avoid discomfort from overcooling.
Cooling mode icon
Temperature adjustment buttons
Mode button
Fan speed adjustment button
Cool mode icon
Mode button | Fan speed |
Temperature | adjustment |
adjustment | button |
buttons |
|
Owner’s manual _10
