TROUBLESHOOTING

Problem

 

Possible Causes

 

Solution

 

 

 

 

 

 

 

The power indicator light is on.

 

The Voltage is lower than

 

Stop the ice maker.

The compressor makes a

 

required. This unit requires a

 

Make sure the voltage is 100

buzzing noise when on.

 

minimum of 100 volts.

 

and restart.

 

 

 

 

 

Water shortage indicator light is

 

1. There is no water or the

 

1. Fill water and restart (press

lit.

 

water level is too low.

 

stop button first then press

 

 

 

 

the start button).

 

 

2. The strainer is blocked

 

2. Clean the strainer.

 

 

 

 

 

Ice full indicator light is on.

 

There is too much ice.

 

Set the unit to the smallest

 

 

 

 

ice cube option.

There is no indicator light on the

 

The fuse is blown.

 

Replace the fuse.

board.

 

 

 

 

 

 

 

 

 

Both water low and ice full

 

The water box cannot tilt

 

Water box is blocked by ice

indicator lights are on.

 

 

 

cubes. (1) Take out the cubes.

 

 

 

 

If not, (2) Turn the water box by

 

 

 

 

hand slightly and restart. If both

 

 

 

 

solutions are not successful,

 

 

 

 

please contact WindChaser

 

 

 

 

Customer Service

 

 

 

 

(see warranty).

 

 

 

 

 

Water Low light is on when the

 

1. Using distilled, reverse

 

1. Add a pinch of salt to water

tank is filled with water

 

osmosis, or other very

 

so that (a) the sensor detects

 

 

pure water.

 

the water, or (b) use less

 

 

2. Air pocket may be

 

pure water.

 

 

 

2. Force some water through the

 

 

preventing the water

 

hole at the bottom right of the

 

 

from contacting the

 

water tank to push water to

 

 

level sensor.

 

the sensor

 

 

 

 

 

The ice cubes are fusing

 

1. Ice making time is too long.

 

1. Stop the machine and reset

together

 

 

 

the ice making time. Start

 

 

 

 

the machine after the ice

 

 

2. The water temperature in the

 

block melts

 

 

 

2. Replace the water in the inner

 

 

inner liner is too low.

 

liner. The suggested water

 

 

 

 

temperature is 44.6ºF-77ºF

 

 

 

 

(7ºC-25ºC)

 

 

 

 

 

Water is not freezing during

 

1. Refrigerant leaks.

 

Contact WindChaser Customer

normal ice making cycle.

 

2. There is a block in the

 

Service.

 

 

 

 

 

 

refrigerating system.

 

 

 

 

 

 

 

PARTS DIAGRAM

Parts Diagram

1.

Inner Liner

7.

Evaporator Rods

13.

Control Panel

2.

Water Storage Tank

8.

Water Inlet Tube

14.

Foot

3.

Ice Collecting Tray

9.

Water Drainage Plug

15.

Strainer

4.

Ice Storage Basket

10. Compressor

16. Temperature Sensor

5.

Ice Pusher

11. Water Pump

 

 

6.

Water Box

12. Lid

 

 

OPERATING INSTRUCTIONS

Pre-Operating Instructions

1.The incline angle of the cabinet should not be over 45º during transportation. Do not turn the ice maker upside-down. Doing so could cause the compressor or refrigerating system to operate incorrectly.

2.The ice maker should be placed on a level and solid surface and away from any heat source and corrosive gas. If the feet of the ice maker are not at a level setting, turn each foot clockwise to raise the foot or counter-clockwise to lower the foot. Continue this with all feet until the unit is stable. At least six inches of clearance should be left around the ice maker to ensure proper ventilation.

3.Before using the ice maker for the first time, wait about 12 hours after positioning it in a proper place.

4.Clean the inside of the ice maker thoroughly. Wipe the inner liner, ice collecting board, water box, ice pusher and evaporator rods.

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be

No. 16 AWG minimum size and rated no less than 1800W.

6

3

Page 4 Page 6
Page 5
Image 5
WindChaser ICM15 manual Troubleshooting, Parts Diagram, Pre-Operating Instructions
Page 4 Page 6

ICM15 specifications

The WindChaser ICM15 is an innovative solution designed for efficient energy generation from wind resources. Its advanced engineering and technology sets it apart in the growing renewable energy market. This compact wind turbine offers remarkable performance while minimizing the environmental footprint, making it a perfect choice for both residential and commercial applications.

One of the main features of the WindChaser ICM15 is its robust and lightweight design, allowing for easy installation and maintenance. The turbine boasts a rated power output of 15 kW, capable of supplying sufficient energy for small to medium-sized facilities. Its high-efficiency rotor blades are specifically designed to optimize energy capture from wind currents, ensuring consistent power generation.

The ICM15 utilizes state-of-the-art control technologies that enhance its operation in varying wind conditions. The turbine is equipped with an intelligent microcontroller that automatically adjusts the pitch angle of the blades to maximize power output and protect the system during extreme wind events. This feature not only improves energy production but also extends the lifespan of the turbine.

In addition to its performance capabilities, the WindChaser ICM15 emphasizes sustainability. It is constructed from eco-friendly materials, and its manufacturing process adheres to strict environmental standards. The turbine’s design minimizes noise emissions and visual impact, making it an attractive option for installations in urban areas.

Connectivity is another hallmark of the ICM15. It comes equipped with advanced monitoring systems that allow users to track energy production and system health in real-time. The turbine is compatible with various grid connection options, enabling seamless integration into existing electrical systems. This feature ensures that users can maximize their energy savings and make informed decisions about their energy consumption.

With a focus on durability, the WindChaser ICM15 is resistant to adverse weather conditions, featuring corrosion-resistant materials and a sturdy structure. It is designed to require minimal maintenance, reducing downtime and operational costs.

In summary, the WindChaser ICM15 is a cutting-edge wind turbine that combines efficiency, sustainability, and advanced technology. Its features make it an excellent choice for those looking to harness wind energy for a cleaner and more sustainable future. As the demand for renewable energy sources increases, the ICM15 stands out as a reliable and innovative solution in the wind energy sector.
Top Page Image Contents