Cleaning
ÎTurn the running gear to the back with your foot.
ÎTurn the program selection switch to the desired cleaning program.
ÎSet the water quantity according to the degree of dirt accumulation and the floor covering.
ÎLower the squeegee tool.
ÎTurn on the brushes by pulling the con- trol handle.
Warning!
Risk of damage to the floor covering. Do not operate the machine on the spot.
Shutting down and parking the ma-
chine
ÎTurn the water quantity control button to the closed position.
ÎDrive the machine forwards for another
ÎTurn the program selection switch to "OFF".
ÎRaise the squeegee tool.
ÎTurn the running gear to the front with your foot.
ÎDisconnect the main plug.
Warning!
Risk of deformation of brushes – when par- king the machine, relieve the pressure on the brushes by turning the running gear to the front
Emptying the Dirty Water Reservoir
Note
If the dirty water reservoir is full the float clo- ses the suction channel. The suction opera- tion is interrupted. Empty the dirty water reservoir.
Warning
Please observe the local regulations regar- ding the wastewater treatment.
ÎTake the dirty water drain hose from the support and lower above a suited collec- tion device.
10English
ÎDrain water by drain hose cover remo- ving.
ÎThe rinse the dirty water reservoir with clear water.
Emptying the fresh water tank
ÎRelease the coupling at the upper end of the fill level display.
ÎLower the hose for the fill level display into a suitable collector and drain off li- quid.
ÎEngage the coupling on the machine again.
Transport
ÎIf you want to transport the machine on a vehicle secure it from slipping.
To reduce the required space the push handle can be turned to the front:
ÎRelease the star grips of the push handle fastening.
ÎTurn the push handle to the front.
Maintenance and care
Danger
Risk of injury. Turn the program selection switch to "OFF" and disconnect the mains plug before performing any work on the ma- chine.
ÎDrain and dispose of dirty water and ex- cess fresh water.
