HANDLE INSTALLATION
HANDLE
ASSEMBLY
2
3
1
HANDLE
MOUNT BRACKET
DECK
ASSEMBLY
The machine is shipped with handle unassembled.
Follow these steps for installation:
1.Remove handle and deck assembly from carton.
2.Remove bolt (item 3), washers (item 2), and nut (item 1) from deck assembly.
3.Install Handle Assembly as shown.
4.Slide Bolt (item 3) thru, washers (item 2), Handle Mount Brackets and Handle Assembly as shown. Tighten bolt (item 3) and nut (item 1) until the handle can not twist in the mount bracket
5.Check handle for movement up and down.
6.Plug cord into handle cord receptacle.
LB2000 | 980088 | 03/08/03 | |
|
|
|