Manuals / Windsor / Household Appliance / Carpet Cleaner

Windsor MPRO GB 10080410, MPRO 10080390 Maintenance, Troubleshooting Chart, Worn brush bearings

Models: MPRO GB 10080410 MPRO EU 10080400 MPRO AU 10080420 MPRO 10080390

1 48
Download 48 pages 2.63 Kb
Page 18
Image 18

MAINTENANCE

TROUBLESHOOTING CHART

Worn brush bearings

Squealing or grinding sound in brush

Replace bearings.

housing.

 

 

 

 

Make several passes at right angles to

Carpet not getting clean

Severe soil conditions

each other.

 

 

Use a pre-spray.

Carpet too wet

Worn spray jet

Replace spray jet which is producing a

fine mist.

 

 

 

Solution filter screen clogged.

Clean solution filter screen located

 

inside lower tank.

 

 

 

 

Clean or replace jet. Do not use a wire

Carpet not getting wet

Spray jet clogged.

to clean jet. Damaged jet will cause

 

over-saturation.

 

 

 

Pump not running.

Check for and correct any loose wires.

 

Repair or replace.

 

 

 

Faulty solution switch.

Replace switch in handle.

4-6

86037780 EXTRACTOR 12/09/06

Page 17 Page 19
Page 18
Image 18
Windsor MPRO GB 10080410, MPRO AU 10080420, MPRO 10080390 manual Maintenance, Troubleshooting Chart, Worn brush bearings
Page 17 Page 19

FAQ

What should I do if the brush bearings are worn?

If you hear a squealing or grinding sound, it's time to replace the bearings.

What can I do if the carpet is not getting clean?

If you're dealing with severe soil conditions, try using a pre-spray to improve cleaning performance.

How do I fix a carpet that is too wet after cleaning?

A worn spray jet may be the culprit. Replace the spray jet to ensure it's producing a fine mist.