Windsor MPRO AU 10080420, MPRO 10080390, MPRO GB 10080410, MPRO EU 10080400 How To Use This Manual

Models: MPRO GB 10080410 MPRO EU 10080400 MPRO AU 10080420 MPRO 10080390

1 48
Download 48 pages 2.63 Kb
Page 4
Image 4
HOW TO USE THIS MANUAL

HOW TO USE THIS MANUAL

This manual contains the following sections:

-HOW TO USE THIS MANUAL

-SAFETY

-OPERATIONS

-MAINTENANCE

-PARTS LIST

The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.

Parts may be ordered from authorized dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual.

The model and serial number of your machine is located on the lower back panel.

The SAFETY section contains important information regarding hazardous or unsafe practices of the machine. Levels of hazards are identified that could result in product damage, personal injury, or severe injury resulting in death.

The OPERATIONS section is to familiarize the operator with the operation and function of the machine.

The MAINTENANCE section contains preventive maintenance to keep the machine and its components in good working condition. They are listed in this general order:

-Periodic

-Daily/Regular

-Troubleshooting

The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information:

-REF – column refers to the reference number on the parts illustration.

-PART NO. – column lists the part number for the part.

-PRV NO. - Reference number.

-QTY – column lists the quantity of the part used in that area of the machine.

-DESCRIPTION – column is a brief description of the part.

-SERIAL NO. FROM – column indicates the first machine the part number is applicable to. When the machine design has changed, this column will indicate serial number of applicable machine. The main illustration shows the most current design of the machine. The boxed illustrations show older designs. If column has an asterisk (*), call manufacturer for serial number.

-NOTES – column for information not noted by the other columns.

NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts.

NOTE: The manual part number is located on the lower left corner of the front cover.

1-1

86037780 EXTRACTOR 12/09/06

Page 4
Image 4
Windsor MPRO AU 10080420, MPRO 10080390, MPRO GB 10080410, MPRO EU 10080400 manual How To Use This Manual

FAQ

Where can I find important information for ordering repair parts?

You can find important information for ordering repair parts in the 'HOW TO USE THIS MANUAL' section of the official manual.

Where is the machine model and serial number located?

The machine model and serial number are located on the inside of the front cover and lower back panel of the manual.

What information is included in the PARTS LIST section?

The PARTS LIST section contains assembled parts illustrations, part numbers, quantities, descriptions, and serial number references.