MAINTENANCE

2. SQUEEGEE BLADES

The front squeegee blade allows solution to pass through channels in the blade into the squeegee assembly while maintaining vacuum to provide lift. The front blade has four wear surfaces and can be rotated for extended life. The front blade should not require regular replacement under normal use.

The rear blade wipes the floor to a near dry condition. It is important the rear blade be in good condition to properly do its job. As with the front, each squeegee blade assembly has four wear surfaces for extended service.

Check both the front and rear squeegee blades for damage, wear, and adjustment each day in the pre- run check. Change the front blade if it is torn or has an uneven edge. Change the rear blade if it is less than 1/2 the original thickness.

ADJUSTING SQUEEGEE

Adjusting the squeegee is a two-part process. First, the squeegee assembly must have correct pitch in order for the squeegee blade to have the same deflection at each tip as well as the center. The knob on the squeegee linkage controls the pitch adjustment. The second adjustment is the deflection. Knobs on each end of the squeegee control this.

SQUEEGEE DEFLECTION

CORRECT

NOT ENOUGH

TOO MUCH

SIDE VIEW OF SQUEEGEE BLADE

TO REMOVE SQUEEGEE ASSEMBLY

1.With the squeegee in the up position, turn key switch “OFF”.

2.Disconnect vacuum hose from squeegee and loosen both knobs.

3.Pull squeegee assembly rearward from the lifting carrier.

4.Inspect or repair as necessary and reinstall.

TO REPLACE OR ROTATE REAR SQUEEGEE BLADES

1.With the squeegee in the up position, turn key switch “OFF”.

FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine and remove key.

2.Remove the squeegee assembly from the machine. Unlatch and remove blade retainer strap and remove squeegee blade.

3.Rotate the squeegee to new edge position or replace as required. Each blade has four new edge positions.

4.Install blade on locating pins of squeegee assembly.

5.Install squeegee retainer strap.

6.Fasten and lock latch, adjust latch only tight enough to take up slack in retaining strap.

TO REPLACE OR ROTATE FRONT SQUEEGEE BLADE

1.With the squeegee in the up position, turn key switch “OFF”.

2.Remove the squeegee from the machine. Loosen three thumbscrews and remove the retainer strap and squeegee blade.

3.Rotate the squeegee to new edge position or replace as required. Each blade has four new edge positions. When installing the front blade, tighten the center thumbscrew first. Insure that the retainer strap is pressed against the blade before tightening the outer screws.

4-6

CUTTER 36V (SCE) 86037030 12/05/06

Page 23 Page 25
Page 24
Image 24
Windsor SCE326, 10052280 Adjusting Squeegee, To Remove Squeegee Assembly, To Replace or Rotate Rear Squeegee Blades
Page 23 Page 25

10052280, SCE326 specifications

Windsor 10052280, also known as SCE326, represents a noteworthy entry in the realm of advanced industrial machinery, particularly catering to the needs of modern manufacturing environments. This intricate piece of equipment is designed with the latest technologies to optimize productivity and efficiency in various industrial applications.

One of the hallmark features of the Windsor 10052280 is its robust construction. Manufactured with high-quality materials, it ensures durability and longevity, making it a reliable choice for demanding operational settings. The engineering behind SCE326 integrates precision mechanics and innovative design, allowing for smooth operations under various conditions. Its compact structure also allows for easy integration into existing manufacturing lines without requiring extensive modifications.

The Windsor 10052280 is equipped with state-of-the-art automation features. Its cutting-edge control system utilizes advanced algorithms, enabling real-time monitoring and adjustments for enhanced performance. This technology not only streamlines operations but also minimizes downtime, a critical factor in maximizing productivity in any manufacturing facility. Additionally, the user-friendly interface ensures that operators can quickly adapt to the system, reducing training time and boosting overall efficiency.

In terms of energy efficiency, the SCE326 is designed to optimize power consumption, aligning with the growing emphasis on sustainability in industrial operations. The implementation of energy-saving technologies helps to lower operational costs while also reducing the environmental impact. This commitment to sustainable practices is further complemented by the machine's ability to run on various energy sources, providing flexibility to operations in different regions.

Moreover, the Windsor 10052280 features enhanced safety mechanisms. Comprehensive safety protocols are integrated into the design, ensuring that both operators and the surrounding environment are protected during operation. Various sensors and alarms are in place to alert users of any potential malfunctions or hazards, reinforcing the machine's status as a safe choice in a busy manufacturing landscape.

Overall, the Windsor 10052280, SCE326 stands out as a sophisticated solution for modern manufacturers. With its durable construction, advanced automation features, energy efficiency, and robust safety measures, it is engineered to meet the dynamic challenges of today's industrial demands effectively. The combination of these characteristics makes it a top choice for businesses aiming to enhance their operational capabilities while ensuring a commitment to quality and sustainability.
Top Page Image Contents