6.SOLUTION STRAINER

The solution strainer is located in front of the left front wheel. The solution strainer protects the solenoid valve from debris. If there is little or no solution flow to the ground, check the strainer for debris. Drain the solution tank and clean the solution strainer. To remove the strainer, turn the bottom part of the strainer counterclockwise until the bottom is separated. Clean out the debris from the wire mesh and re-assemble. Make sure the O-ring gasket is in place when re- assembled

7.BRUSH MOTOR

!

Do not use a pressure washer to clean around the brush motors. Use tap pressure only.

CHANGING BRUSH MOTORS

1.With the scrub deck in the stored position, disconnect brush motor wiring connector from harness.

2.Remove shrouds from scrub deck to access and remove scrub brushes or pad drivers.

3.Remove retaining bolt, lock washer, flat washer and star drive from brush motor shaft.

4.Remove 4 brush motor mounting bolts located under scrub deck.

5.Remove brush motor.

6.Reverse steps to install.

BRUSH MOTOR CARBON BRUSH

REPLACEMENT

1.Scribe alignment mark on motor barrel to motor cap. Remove two bolts.

2.Remove end cap from motor.

NOTE: Motors contain two wave washers in cap. Do not lose these.

3.Release brush from spring tension. Remove screw connecting brush wire lead to brush holder. Clean brush holder to insure free movement.

4.Retract spring and install new brush. Install connector screw and lead.

5.When all new brushes are installed. Place all in retracted position, held into brush holder by spring tension.

6.Carefully place end cap onto bearing on motor shaft.

NOTE: Use care to assure wave washer alignment.

MAINTENANCE

7.With end cap in partially installed position, release all brushes to contact position with motor commutator.

NOTE: Failure to insure all brushes are released will result in motor failure.

8.Reset end cap and realign with scribe marks on motor barrel. Reinstall the two attach bolts from cap into base.

9.Maintain alignment between motor barrel base and cap.

GREASING AXLE

Mobiltemp®78 or compatible clay-based or calcium- based grease.

NOTE: Use hand operated grease gun only.

CUTTER 36V (SCE) 86037030 12/05/06

4-9

Page 26 Page 28
Page 27
Image 27
Windsor 10052280, SCE326 Solution Strainer, Changing Brush Motors, Brush Motor Carbon Brush Replacement, Greasing Axle
Page 26 Page 28

10052280, SCE326 specifications

Windsor 10052280, also known as SCE326, represents a noteworthy entry in the realm of advanced industrial machinery, particularly catering to the needs of modern manufacturing environments. This intricate piece of equipment is designed with the latest technologies to optimize productivity and efficiency in various industrial applications.

One of the hallmark features of the Windsor 10052280 is its robust construction. Manufactured with high-quality materials, it ensures durability and longevity, making it a reliable choice for demanding operational settings. The engineering behind SCE326 integrates precision mechanics and innovative design, allowing for smooth operations under various conditions. Its compact structure also allows for easy integration into existing manufacturing lines without requiring extensive modifications.

The Windsor 10052280 is equipped with state-of-the-art automation features. Its cutting-edge control system utilizes advanced algorithms, enabling real-time monitoring and adjustments for enhanced performance. This technology not only streamlines operations but also minimizes downtime, a critical factor in maximizing productivity in any manufacturing facility. Additionally, the user-friendly interface ensures that operators can quickly adapt to the system, reducing training time and boosting overall efficiency.

In terms of energy efficiency, the SCE326 is designed to optimize power consumption, aligning with the growing emphasis on sustainability in industrial operations. The implementation of energy-saving technologies helps to lower operational costs while also reducing the environmental impact. This commitment to sustainable practices is further complemented by the machine's ability to run on various energy sources, providing flexibility to operations in different regions.

Moreover, the Windsor 10052280 features enhanced safety mechanisms. Comprehensive safety protocols are integrated into the design, ensuring that both operators and the surrounding environment are protected during operation. Various sensors and alarms are in place to alert users of any potential malfunctions or hazards, reinforcing the machine's status as a safe choice in a busy manufacturing landscape.

Overall, the Windsor 10052280, SCE326 stands out as a sophisticated solution for modern manufacturers. With its durable construction, advanced automation features, energy efficiency, and robust safety measures, it is engineered to meet the dynamic challenges of today's industrial demands effectively. The combination of these characteristics makes it a top choice for businesses aiming to enhance their operational capabilities while ensuring a commitment to quality and sustainability.
Top Page Image Contents