TO ADJUST SQUEEGEE PITCH

1.Choose a smooth, level surface. Turn “ON” the key switch. Lower the squeegee and drive forward at least 2 feet (60cm.).

2.With the squeegee down, stop the machine. Do not allow machine to roll back.

FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn off machine and remove key.

3.Determine the differences, if any, in deflection of the squeegee blade between each end and the middle. Proper adjustment is obtained when deflection is equal all the way across the squeegee blade. The bubble level should also indicate when the squeegee is adjusted properly. When the air bubble is in the center of the vial, the deflection should be even across the squeegee blade.

4.To decrease the deflection of the squeegee blade at the ends, tighten knob near the squeegee center. To increase the deflection at the ends of the squeegee assembly, loosen knob.

5.Check the deflection of the squeegee blades again. Repeat steps 1 through 4 until the deflection is equal across the entire rear squeegee blade.

SQUEEGEE DEFLECTION

CORRECT

SIDE VIEW OF SQUEEGEE BLADE

MAINTENANCE

TO ADJUST AMOUNT OF REAR SQUEEGEE DEFLECTION

1.Choose a smooth, level surface. Lower the squeegee and drive forward at least 2 feet (60cm).

2.With the squeegee down, stop the machine. Do not allow machine to roll back.

FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine and remove key.

3.Observe the amount of squeegee deflection. It should deflect 3/8 in. (9.5mm) across the entire width of the squeegee.

4.To increase the squeegee deflection, turn the 2 knobs at the squeegee ends counter-clockwise. To decrease the deflection, turn the knobs clockwise.

NOTE: The deflection should be consistent along the length of the squeegee. If the deflection varies from end to end the knobs can be adjusted independently to correct the variation.

5.Turn on the key switch. Raise, then lower squeegee assembly. Drive forward at least 2 feet (60cm).

6.Repeat steps 2 through 4 until deflection of 3/8 in. (9.5mm) is reached.

3.TO REPLACE AQUA-MIZER SQUEEGEE

BLADES

These squeegee blades have two wear edges. To use the second edge:

1.Remove deck shrouds.

2.Remove brushes or pad drivers.

3.Remove each of the Aqua-Mizer squeegee systems.

4.Remove the hardware from each system that retains the blade.

5.Flip the blades and replace hardware.

6.Re-install each Aqua-Mizer system, brushes or pad drivers and shrouds.

CUTTER 36V (SCE) 86037030 12/05/06

4-7

Page 24 Page 26
Page 25
Image 25
Windsor 10052280, SCE326 manual To Adjust Squeegee Pitch, To Adjust Amount of Rear Squeegee Deflection
Page 24 Page 26

10052280, SCE326 specifications

Windsor 10052280, also known as SCE326, represents a noteworthy entry in the realm of advanced industrial machinery, particularly catering to the needs of modern manufacturing environments. This intricate piece of equipment is designed with the latest technologies to optimize productivity and efficiency in various industrial applications.

One of the hallmark features of the Windsor 10052280 is its robust construction. Manufactured with high-quality materials, it ensures durability and longevity, making it a reliable choice for demanding operational settings. The engineering behind SCE326 integrates precision mechanics and innovative design, allowing for smooth operations under various conditions. Its compact structure also allows for easy integration into existing manufacturing lines without requiring extensive modifications.

The Windsor 10052280 is equipped with state-of-the-art automation features. Its cutting-edge control system utilizes advanced algorithms, enabling real-time monitoring and adjustments for enhanced performance. This technology not only streamlines operations but also minimizes downtime, a critical factor in maximizing productivity in any manufacturing facility. Additionally, the user-friendly interface ensures that operators can quickly adapt to the system, reducing training time and boosting overall efficiency.

In terms of energy efficiency, the SCE326 is designed to optimize power consumption, aligning with the growing emphasis on sustainability in industrial operations. The implementation of energy-saving technologies helps to lower operational costs while also reducing the environmental impact. This commitment to sustainable practices is further complemented by the machine's ability to run on various energy sources, providing flexibility to operations in different regions.

Moreover, the Windsor 10052280 features enhanced safety mechanisms. Comprehensive safety protocols are integrated into the design, ensuring that both operators and the surrounding environment are protected during operation. Various sensors and alarms are in place to alert users of any potential malfunctions or hazards, reinforcing the machine's status as a safe choice in a busy manufacturing landscape.

Overall, the Windsor 10052280, SCE326 stands out as a sophisticated solution for modern manufacturers. With its durable construction, advanced automation features, energy efficiency, and robust safety measures, it is engineered to meet the dynamic challenges of today's industrial demands effectively. The combination of these characteristics makes it a top choice for businesses aiming to enhance their operational capabilities while ensuring a commitment to quality and sustainability.
Top Page Image Contents