Parts Included • Tools Needed • How to Unpack
PARTS INCLUDED:
1 | Radome | 1 Cable entry plate |
3 base mounting feet | 1 large yellow spade connector | |
1 Power switch | 2 small red spade connectors | |
2 | Wall plates (white & brown) | All required screws and washers |
1 | Surface mount box | 1 base with electronics, dish, dual LNBF |
2 | Cable clamps | 1 tube silicone |
TOOLS NEEDED FOR UNPACKING & INSTALLATION:
7/16” open end wrench Level
Drill w/3/4” bit
1/8” Allen wrench
UNPACKING THE UNIT
1. Open box and remove packing material.
If using knife to open
!carton, BE CAREFUL. Do not cut the dome on the unit.
2.Lift unit out of box vertically. Do not turn box and “roll” out, or turn upside down to remove.
1/2” Open end wrench
Crimping tool for coax connections Crimping tool for electrical connections Small blade screw driver
Pliers
Sealant (consult RV manufacturer for proper type for your roof material)
LIFT UNIT STRAIGHT UP
USE 2 PEOPLE
when removing the unit from the carton.
6
