Parts Included • Tools Needed • Unpacking the Unit
PARTS INCLUDED*:
1 Dome
1 base with electronics, dish, dual LNBF
*Aftermarket versions also include all mounting hardware and cabling required for a single receiver installation
TOOLS NEEDED FOR UNPACKING & INSTALLATION:
Level
Drill with 3/4” bit
UNPACKING THE UNIT:
1. Open box and remove packing material.
If using knife to open ! carton, BE CAREFUL.
Do not cut the dome on the unit.
For Winegard Warranty Information:
Attn: Technical Services Winegard Company 3111 Kirkwood St. Burlington, IA 52601
Fax:
3/8” Open end wrench 7/16” Open end wrench
Sealant (consult RV manufacturer for proper type for your roof material)
2.Lift unit out of box vertically. Do not turn box and “roll” out, or turn upside down to remove.
USE 2 PEOPLE
when removing the unit from the carton.
DO NOT PAINT DOME! ! Painting dome will cause
signal degradation and will void your warranty.
Disclaimer:
Although every effort has been made to insure the information in this manual is correct and complete, no company shall be held liable for any errors or omissions in this manual. Changes and technological advances are continu- ously being made in the satellite market. Information provided in this manual was accurate at the time of printing. If the RoadTrip Minimax does not function as expected, please contact Winegard Company at (800)
Trademarks:
Winegard and RoadTrip Minimax are registered trademarks of Winegard Company. DISH Network is a registered trademark of EchoStar Communications Corp. DIRECTV is a registered trademark of Hughes Electronics Corp. All trademarks contained in this manual are property of their respective owners. Reference made to products or services provided by companies, other than Winegard Company, does not represent any endorsement of those products or services.
2
