•Washable Carbon Filter (5000 & 5000S)
Activated granular carbon effectively collects chemical vapors and odors caused by cigarette smoke, organic decay, and cooking.
•PlasmaWave™ (All)
In the final stage of cleaning, Winix PlasmaWaveTM technology generates both positive and negative ions to create plasma clusters which instantly neutralize viruses, bacteria, chemical vapors and odors in the air.
AIR CLEANER SET-UP
NOTE: Follow these instructions for best results.
•Place unit at least 7 feet from equipment that emits electric waves such as televisions or radios.
•Place unit at least 2 feet from the wall.
•Keep sensors away from drafty areas.
•Keep curtains away from sensors, as they may interfere with air intake/outlet.
•Place unit on a stable surface with plenty of air circulation.
1.Remove protective film from the control panel.
2. Remove the front panel by grasping the bottom outside edges and gently pulling toward you.
3. Pull out the filter cassette by grasping the tabs located on each side of the filter cassette. (There are no tabs on 5000B HEPA filter.)
4. Remove the plastic wrap from the filter cassette.
5. Return the filter cassette into the main unit.
6. Replace the front panel by hooking the front panel on the top of the unit. Swing panel in by pushing gently until the panel snaps into place.
7.Plug in the power cord to a wall outlet.
8.Press POWER button until short
“beep” is heard.
For the first 4 minutes after turning the unit on, the dust and odor indicators will flash while the unit measures air quality.
5
