User manual W3532
- 19 -
SELF-MOVING ROTARY CUTTER
Working action Before
commission
ing (new
cutter)
After the
first 10
hours
After the
first 50
hours
Monthly
inspection After each 50
hours After each
100 hours After each
season After 500
hours or after
1 year
- checking the tightening of the belts • • • • •
- checking the angular joints and
adjustment of the clearance for
control
• • • •
- checking the function of the brake
and adjustment • • • •
- checking the inflation of the tyres • • • • • •
- checking the adjustment of the
travel (neutral position) • • • •
- checking the oil level of the
hydraulic system (SAE 15 W 50,
super mogul oil) • • • • •
- replacement of oil in the hydraulic
system • •
- replacement of the insert of the oil
cleaner in the hydraulic system • •
- checking the vertical pins of the rear
axle • • • •
- checking the function of drivers,
safety switches, fuses and lights • • • •
- lubrication of pinion and control
segment (including bearings) • • • •
- lubrication of angular joints and
lifting pockets • • •
- checking the status of the
accumulator • • • • •
- checking the mounting of the wheel • • • • •
- lubrication of the bowden of the gas
control and starter • • • •
ENGINE
Working action Before
commissionin
g (new cutter)
After the
first 5
hours
After the first
10 hours Weekly
checking Monthly
inspection After each 50
hours After each 100
hours After each
200 hours After each
season
- checking the volume of
engine oil - mogul super
15W50 (Mogul super M8AD) • • • • • • • •
- replacement of engine oil • •
- replacement of oil filter • •
- cleaning of engine air filter •
• • • - checking fuel system
(tightness, wearing) •
• • • - replacement of fuel filter
• • • - replacement of ignition
plugs •
- replacement of air filter
•