Wolf manual Gas Rangetop Operation Surface Burners, Burner Assembly, Grate Placement

Gas Rangetop Operation 9

Surface Burners

A spark electrode ignites each surface burner. This control eliminates the need for continuous open flame pilots. For added safety and convenience, each burner is designed with an electronic reignition system. This feature enables any burner to relight automatically in the event it is acci- dentally extinguished.

BURNER ASSEMBLY

After removing burner parts for cleaning, it is important that you reassemble the burners correctly. Refer to the illustrations below for proper alignment of the base and upper burner parts. The center burner cap does not have a special orientation but should be seated flat.

Failure to position the burner parts correctly could cause flames or gas to escape and burn between parts, resulting in poor combustion or damage to your gas rangetop.

wolfappliance.com

GRATE PLACEMENT

Position the porcelain-coated, cast iron burner grates with the five fingers of each grate facing toward the front of the gas range. The back of each grate has three fingers. Refer to the illustration below.

Grate placement.

CENTER CROSS

IGNITER CAP RING

BURNER BASE

OUTER
BURNER RING	DRIP PAN

CENTER CAP

IGNITER

Burner base. Upper burner.