WO LF DR AWER MICR OWAVE
| EL EC TRI CAL REQU IREMENT S | DRAWE R IN ST AL LA TI ON | ||
| GR OU NDING | 1) | Place the drawer adjacent to the wall or | |
|
| cabinet opening. Plug the power supply | ||
| I N S TRU CT IO NS |
| cord into the electrical outlet. | |
| 2) | Carefully guide the drawer into the | ||
|
| |||
I MPOR TAN T | This appliance must be grounded. The drawer |
| prepared opening. Avoid pinching the cord | |
microwave is equipped with a cord having a |
| between the oven and the wall. | ||
NO TE |
| |||
grounding wire with a grounding plug. It must |
|
| ||
| 3) | Slide the drawer all the way until the | ||
| be plugged into a wall receptacle that is | |||
|
| mounting flange is flush with the face of | ||
You must follow | properly installed and grounded in accordance |
| ||
| the cabinet. See illustration below. | |||
all National | with the National Electrical Code and local |
| ||
|
| |||
Electrical Code | codes and ordinances. In the event of an elec- | 4) | Open the drawer. Using the 4 holes on the | |
regulations. In | trical short circuit, grounding reduces risk of |
| drawer as a template, pre drill the cabinet | |
addition, be aware |
| |||
electric shock by providing an escape wire for |
| using a 1/16" (1.6) bit. See illustration below. | ||
of local codes and |
| |||
the electric current. |
|
| ||
ordinances when | 5) | Secure the drawer with the 4 screws | ||
| ||||
installing your |
|
|
| supplied. See illustration below. |
service. |
|
|
| |
|
|
|
| |
|
|
|
|
|
Improper use of the grounding plug can result in a risk of electric shock. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
| Mounting |
Grounding Pin | Flange |
| |
| |
Ground Receptacle Box | 4 screws provided |
Grounding | Drawer installation |
| Dimensions in parentheses are in |
10 | millimeters unless otherwise specified. |
