Wolf Appliance Company GAS COOK TOPS W O L F Gas Cooktops, Before Y O U S Ta Rt

Models: GAS COOK TOPS

1 16
Download 16 pages 3.64 Kb
Page 4
Image 4
BEFORE Y O U S TA RT

W O L F GAS COOKTOPS

BEFORE Y O U S TA RT

Proper installation is your responsibility. Have a qualified technician install this cooktop. You must also assure that electri- cal installation is adequate and in compli- ance with all local codes and ordinances.

Wolf gas cooktops are manufactured for use with natural gas or LP gas. Please check product rating plate for type of gas needed.

Proper gas supply connection must be available; refer to Gas Supply Requirements on page 10. Electrical ground is required; see Electrical Requirements on page 11.

Check the location where the cooktop will be installed. The location should be away from strong draft areas, such as windows, doors and strong heating vents or fans. Do not obstruct flow of combustion and ventilation air.

Make sure you have everything necessary for correct installation. It is the responsibil- ity of the installer to comply with the instal- lation clearances specified on the product rating plate. The rating plate can be found on the underside of the cooktop.

This cooktop is intended for indoor use.

C O M M O N W E A LT H O F M A S S A C H U S E T T S

Installations and repairs must be performed by a qualified or licensed contractor, plumber or gas fitter qualified or licensed by the state, province, or region where this appliance is being installed.

Use only gas shut-off valves approved for use within the state, province, or region where this appliance is being installed.

A flexible gas connector, when used, must not exceed 3' (.9 m).

4

Page 4
Image 4
Wolf Appliance Company GAS COOK TOPS installation instructions W O L F Gas Cooktops, Before Y O U S Ta Rt