Wolf Appliance Company GAS COOK TOPS installation instructions D E L C T 3 6 G D I M E N S I O N S

W O L F GAS COOKTOPS

INSTALLATION S P E C I F I C AT I O N S

The illustrations below provide the overall dimensions, countertop cut-out and installation specifications for Model CT36G.

IMPORTANT NOTE: 39" (991) wide cabinets are recommended for installation of Model CT36G.

AWolf 36" (914) built-in oven may be installed below Model CT36G. For this installation, unless you are using cabinets deeper than 24" (610), it is recommended that the electrical and gas supply be placed in the base cabinet to the right of the oven. Refer to installation instruc- tions provided with the built-in oven for addi- tional specifications.

If the Model CT36G is installed above cabinets, the gas and electrical placement is not critical. A grounded outlet needs to be placed within 4' (1.2 m) of the right rear of the cooktop.

When a 36" (914) built-in oven is installed below Model CT36G, it is recommended that the rough opening for the oven be 7 3/4" (197) from the floor to ease the use of the oven door.

IMPORTANT NOTE: When multiple cooktop units are installed side by side, refer to the countertop cut-out dimensions on page 9.

I N S TA L L AT I O N S P E C I F I C AT I O N S – M O D E L C T 3 6 G

21"

(533)

OVERALL

DEPTH

36" (914)

OVERALL WIDTH

4" (102)

Overall Dimensions

M O D E L C T 3 6 G D I M E N S I O N S

Overall Width	36" (914)
Overall Height	4"	(102)
Overall Depth	21"	(533)

13" max

	(330)
21/2"**	191/4" (489)
(64)	COOKTOP CUT-OUT
	DEPTH
	24"min
	(610)

18"

(457)

21/2"min

(64)

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

		39" (991)
							30" (762)
9"*min (229)				RECOMMENDED CABINET WIDTH
						36"min (914)	COUNTERTOP TO
CUT-OUT TO			35" (889)					COMBUSTIBLE
COMBUSTIBLE								MATERIALS
	MATERIALS				COOKTOP CUT-OUT WIDTH		ABOVE COOKTOP
(BOTH SIDES)

4" (102)
31/2" (89)	E	G
33/4"min (95)	10"
	(254)
36-INCH OVEN OPENING

Recommended
Cabinet Width	39" (991)
Minimum Cabinet Depth	22 3/4" (578)
Minimum Height Clearance 4" (102)
Cut-Out Width	35" (889)
Cut-Out Depth	191/4" (489)

Unit dimensions may vary to ± 1/8" (3).

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

		35" (889)
Countertop Cut-Out			COOKTOP CUT-OUT WIDTH
				191/4" (489)
2	1/2"min				COOKTOP
					CUT-OUT DEPTH
	(64)

FRONT OF COUNTERTOP

8