Wolf Appliance Company GAS COOK TOPS C O U N T E Rto P C U T- O U T D I M E N S I O N S

INSTALLATION I N S T R U C T I O N S

SITE P R E PA R AT I O N

C O U N T E RTO P C U T- O U T D I M E N S I O N S

IMPORTANT NOTE: Countertop opening dimensions shown on the following pages must be used. The dimensions shown provide for required clearances.

These cooktops are designed to fit a standard 24" (610) deep base cabinet with a 25" (635) deep countertop. Before making the counter- top cut-out, verify that the cooktop will clear the side walls of the base cabinet below. There should be at least 51/2" (140) clearance between the countertop and any combustible surface directly below the unit.

If the cabinet has a drawer, a 41/2" (114) depth clearance from the countertop to the top of the drawer (or other obstruction) in the base cabinet is required. The drawer depth may need to be shortened to avoid interfering with the gas pressure regulator.

IMPORTANT NOTE: Do not seal the cooktop to the countertop. It must be removed if service is necessary.

Dimensions in parentheses are in millimeters unless otherwise specified.

L O C AT I O N R E Q U I R E M E N T S

Illustrations on the following pages provide the overall dimensions, countertop cut-out and installation specifications for Wolf gas cooktops. Maintain the following minimum installation dimensions:

Minimum horizontal clearance from the sides and back of the cooktop cut-out to adjacent vertical combustible construction, extending a minimum of 18" (457) above the countertop, is as follows: 7" (178) from side edges of cut-out for the 15" (381) cooktop; 9" (229) from side edges of cut-out for the 30" (762) and 36" (914) cooktops;

21/2" (64) from rear edge of cut-out.

Minimum vertical distance between the countertop and combustible materials above the cooktop must be 30" (762).

Maximum 13" (330) depth of overhead side cabinets directly above and within side clearance.

IMPORTANT NOTE: When installing a ventila- tion hood, refer to the specific requirements of the hood for the minimum dimension to countertop.

Failure to locate the cooktop without the proper clearances will result in a fire hazard.

5