Wolf Appliance Company PWC362418 dimensions C T I N G C O N S I D E R a T I O N S

Planning Information

Pro 36" (914) Wall Chimney Hood

M O D E L P W C 3 6 2 4 1 8 ( R )

D U C T I N G C O N S I D E R A T I O N S

Wolf Pro wall chimney ventilation hoods are shipped without the blower assembly. Internal, in-line and remote blower assemblies are available.

IMPORTANT NOTE: Install this ventilation hood only with a Wolf blower.

Wolf Pro wall chimney hoods have a vertical discharge location with 10" (254) round duct. A transition with backdraft damper is included. The hood will operate most efficiently when ductwork does not exceed 50' (15 m) in length.

Local building codes may require the use of make-up air. Consult your local HVAC profes- sional for specific requirements in your area.

IMPORTANT NOTE: Wolf Pro wall chimney hoods must be vented to the outside. Use only metal ductwork.

Refer to the illustration below for ducting considerations for Pro wall chimney hoods.

		DUCTWORK INSTALLATION
		THROUGH ROOF
ROOF CAP OR REMOTE BLOWER
10" (254) ROUND DUCT
		TRANSITION
		14"W x 93/4"D TO 10" ROUND
		7"H (INCLUDING FLANGES)
SOFFIT OR CABINET
OR DUCT COVER
		VERTICAL DISCHARGE
18" (457)		163/4" (425)
HEIGHT	WALL HOOD	TOP OF WOOD
OF HOOD		MOUNTING STRIP
	24" (610)
30" TO 36"	DEPTH OF HOOD
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
NOTE: VERTICAL DISCHARGE ONLY FOR PRO WALL CHIMNEY HOODS.

Ducting for Pro wall chimney hoods.

Dimensions in parentheses are in

millimeters unless otherwise specified. 6