Wolf Appliance Company PWC362418 dimensions Pro 36 914 Wall Chimney Hood, Planning Information

Planning Information

Pro 36" (914) Wall Chimney Hood

M O D E L P W C 3 6 2 4 1 8 ( R )

W O L F B L O W E R A S S E M B L I E S

A ventilation system must include a blower assembly. Wolf ventilation hoods are shipped without the blower assembly. An internal, in-line or remote blower assembly must be selected to accommodate the cooking appliance, CFM requirements and homeowner preferences. Internal, in-line and remote blower assemblies are available as sales accessories through your Wolf dealer.

IMPORTANT NOTE: Use only a Wolf blower with all Wolf ventilation products.

		247/8"
		(632)
18"	12"
(457)
	(305)
		8"
		(203)
	22"	18"
	(559)	(457)

Internal blowers are mounted inside the hood canopy. In-line blowers are mounted in between the hood and the exterior of the home. Remote blowers can be mounted on the roof or in some cases, on an exterior wall. Refer to the illustra- tions below for dimensions of Wolf in-line and remote blowers.

Pro ventilation recommendation charts on the following page provide minimum CFM recom- mendations according to the cooking appliance and ventilation hood used and blower options for each specific Pro wall chimney hood.

In-line BLOWER-110IL

		203/4"
281/4"		(527)
(718)	10" (254)
	Diameter
151/2"		241/2"
(394)
		(622)
	14"
	(356)
	243/4"	43/4"
		(121)
	(629)

Remote BLOWER-90REM

	18" (457)
	10"
291/2"	(254)
(749)
10" (254)
Diameter
143/4"	1
(375)	29 /2"
	(749)
101/8"
(257)
22"	71/4"
(559)	(184)

Remote BLOWER-120REM

	21" (533)
	10"
291/2"	(254)
(749)
10" (254)
Diameter
143/4"	291/2"
(375)
	(749)
103/8"
(264)
25"	71/4"
(635)	(184)

Remote BLOWER-150REM

Unit dimensions may vary by ± 1/8" (3).

Dimensions in parentheses are in
millimeters unless otherwise specified.	7