Wolfgang Puck BFPR0040 operating instructions Disassembly of Your, Food Processor

HSN_4CupFoodProcManual08_2 8/22/08 1:32 PM Page 15

Processing More than 4 Cups

continued

Warning! Blades are razor sharp; always handle discs by the white center rim, not by the blade itself.

5Place Cover onto Processor Bowl and lock into place. Ensure that the Food Chute door is in the up position to allow your ingredients to exit out of the Ejector Chute during processing. See figure 12.

	Disassembly of Your
	Food Processor.
figure 14	Warning! Always wait for the Chopping Blade
	to stop moving completely before removing
	the Cover.

6Always cut and load food flat-side down into the Food Chute. Insert the Food Pusher into the Food Chute and apply slight pressure while holding the PULSE button down to process the food. (See “Helpful Hints” for more processing.) When the Food Chute is empty, release the PULSE button. It’s normal for a small piece of unprocessed food to be left between the Slicing/Shredding Discs and Bowl Lid.

7Remove the Lid, and then remove the disc before removing the work bowl. Remove the work bowl by turning counter-clockwise and lifting straight up.

Warning! Blades are razor sharp; always handle discs by the white center rim, not by the blade itself (See figure 14).

Only grasp under lip

figure 15

Depress flexible tabs

figure 16

1Remove the Processing Bowl Cover by turning counter-clockwise and lifting straight up.

2If using the Chopping Blade, remove the Spindle with Chopping Blade attached. Depress the two flexible tabs located just above the Chopping Blade and press in while pushing the Chopping Blade up. See figure 15.

3If using one of the Processing Discs, remove first by grasping the center plastic section of the Disc. See figure 16. Lift straight up to remove, then remove center shaft.

4To remove the Work Bowl, grasp the handle and turn counter-clockwise to the 3 o’clock position and lift straight up.

Only grasp by center plastic section

15 16