Woods Equipment 1013460 installation manual Install Front Mounts, With Woods LS84 Loader Mount

Install Front Mounts

With Woods LS84 Loader Mount

Attach front mount (32) to the right loader mount using two cap screws (26), hardened flat washers

(23)and hex nuts (27).

23.57817 5/8 Hardened flat washer

26.902 5/8 NC x 2 HHCS GR5

27.230 5/8 NC Hex nut

32. 1026846 Front mount (LS84 only)

Figure 4. Front Mount Installation

With New Holland 14LA Loader Mount or Woods LC96, LC102, 1009, 1012 Loader Mount

NOTE: Front mounts can be installed over the loader mount or loader mount and mid-mount mower bracket. Pictures show mid-mount installed.

1.Remove two bolts connecting loader mount/mid- mount mower bracket to the tractor frame. See Figure 5.

2.Attach left front mount (8) to tractor using two cap screws (20) and hardened flat washers (23). If mid-mount is installed use cap screws (19). See Figure 6.

3.Attach right front mount (9) to tractor using two cap screws (20) and hardened flat washers (23). If mid-mount is installed use cap screws (19). See Figure 7.

Remove

DP3

Figure 5. Remove Hardware - Left Side Shown

19

23

8

DP4

Figure 6. Left Front Mount Installed

Figure 7. Front Mount Installation

8.1013475 Left front mount

9.1026847 Right front mount

19.307430 M16 x 2.0P x 70 mm Cap screw

20307429 M16 x 2.0P x 55 mm Cap screw (use without mid-mount bracket)

23.57817 5/8 Hardened flat washer

6 Installation MAN0406 (Rev.9/7/2007)