SPINDLE ASSEMBLY
REF | PART |
| QTY | DESCRIPTION |
1 | 4116 |
| 1 | Spindle |
2 | 5089 |
| 2 | Seal |
3 | 4114 |
| 1 | Sleeve |
4 | 4115 |
| 1 | Pin |
5 | 4107 |
| 2 | Bearing cone |
6 | 4117 |
| 1 | Housing with cups |
7 | 4106 |
| 2 | Bearing cup |
8 | 1972 | * | 1 | Grease fitting |
9 | 4105 |
| 1 | Spindle shaft |
10 | 4110 |
| 1 | Shoulder washer |
11 | 6950KT |
| 1 | |
|
|
|
| (std for 59) |
11 | 26559KT † | 1 | ||
|
|
|
| (optional for 59) |
12 | 10658 |
| 1 | 5/8 NC x |
13 | 3490 |
| 1 | Blade bolt wrench (used prior to |
|
|
|
| 1964 |
14 | 2974 |
| 1 | Spindle lock wrench |
16 | 10635 |
| 2 | 5/8 Cup washer |
17 | 692 | * | 1 | 5/8 Flat washer |
18 | 1015825 |
| 1 | Blade bolt & washers |
|
|
|
| (complete) |
*Obtain locally, standard hardware
†For use in sandy areas or where high abrasive wear occurs on fin of standard blade.
NOTE: Repair items shaft (9) and sleeve (3) do not have a hole drilled in them for pin (4). After new parts have been assembled and proper bearing adjustment obtained, drill a 3/16 diameter hole through sleeve and shaft. Drive in
18 Parts | 29932 (Rev. 8/10/2007) |
|
|
