Woods Equipment 59LB-1 manual Casters, Parts, Obtain locally, standard hardware

CASTERS

REF	PART		QTY	DESCRIPTION
1	29750		1	Right and left caster bundle
2	12243		1	Caster yoke (includes bolt, nut &
				sleeve)
3	29746	(a)	1	Right caster arm asy, 13-5/32"
				long -or-
3	6761	(a)	1	Right caster arm asy, 16-5/32"
				long
4	29747	(a)	1	Left caster arm asy, 13-5/32" long
				-or-
4	18424	(a)	1	Left caster arm asy, 16-5/32" long
5	19703		1	8" HD Caster wheel with sleeve
7	-----	*	1	Straight 1/4 self-tapping grease
				fitting (for steel wheel) -or-
7	195	*	1	Straight 1/8P thread grease fitting
				(for polyethylene wheel)
8	21020		1	1/4 x 1-1/4 Spirol pin -or-
8	1285	*	1	1/4 x 1-1/2 Cotter pin
9	12296	*	1	1/4 - 28 Straight grease fitting,
				15/32" long
10	12169	*	2	3/8 NC x 1-1/4 HHCS GR5
11	838	*	2	3/8 Standard lock washer
12	835	*	2	3/8 NC Hex nut, plated
13	765	*	1	1/2 NC Hex lock nut
14	23479		1	1/2 NC x 5 HHCS GR5
15	29368	(c)	1	1/2 x 3/4 OD x 3-3/8 Sleeve -or-
15	12242	(c)	1	17 GA Wall x 5/8 OD x 3-3/8 tube
16	29375	(b)	2	3/4 Bore flanged bearing for 1-1/8
				hole -or-
16	4228	(b)	2	5/8 Bore flanged bearing for 1-3/8
				hole -or-
16	2905	(b)	2	5/8 Bore flanged bearing for 1-1/8
				hole -or-
16	65578	(b)	2	3/4 Bore x 1.385 flanged wheel
				bearing with groove
17	22240		2	3/4 x 1-3/16 x 10 GA Washer
18	4181		2	25/32 x 1 x 1/2 Heat-treated
				sleeve

* Obtain locally, standard hardware

(a)For proper caster arm identification, refer to dimension “L” as shown on drawing. The caster arms may be used on either side to obtain best fit.

(b)Measure old bearing.

(c)Measure outside diameter of old sleeve.

29932 (Rev. 8/10/2007) Parts 19