Woods Equipment BW180XQ, BW126XQ Danger, Safety & Instructional Decals, 1000 RPM, Keep Away

18865--C

15922-C

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

WARNING

DO NOT EXCEED PTO SPEED OF

1000 RPM

PTO speeds higher than 1000 RPM can cause equipment failure and personal injury.

WARNING￿￿￿￿￿￿ ￿￿￿￿￿

￿￿￿ 540￿￿￿￿￿￿￿￿￿￿RPM￿ ￿￿￿"￿￿#￿￿￿￿￿$

￿￿￿￿￿￿￿￿￿ ￿￿￿￿!￿￿

18866-D

5- PN 15922 (1000 RPM)

OR

6- PN 18866 (540 RPM)

8 - PN 18864

DANGER

ROTATING DRIVELINECONTACT CAN CAUSE DEATHKEEP AWAY!DO NOT OPERATE WITHOUT -

All driveline guards, tractor and equipment shields in place

Drivelines securely attached at both ends

Driveline guards that turn freely on

driveline18864-C

7 - PN 15503

9 - PN 18865

WARNING

FALLING OFF CAN RESULT IN BEING RUN OVER.

„Tractor must be equipped with ROPS (or ROPS CAB) and seat belt. Keep foldable ROPS systems in “locked up” position at all times.

„Buckle Up! Keep seat belt securely fastened.

„Allow no riders.

RAISED EQUIPMENT CAN DROP AND CRUSH.

„Before working underneath, follow all instructions and safety rules in operator’s manual and securely block up all corners of equipment with jack stands.

„Securely blocking prevents equipment dropping from hydraulic leak- down, hydraulic system failures or mechanical component failures.

FALLING OFF OR FAILING TO BLOCK SECURELY CAN RESULT IN SERIOUS INJURY OR DEATH.

11 - PN 19924

DANGER

ROTATING BLADES AND

THROWN OBJECTS

Do not put hands or feet under or into mower when engine is running.

Before mowing, clear area of objects that may be thrown by blade.

Keep bystanders away.

Keep guards in place and in good condition.

BLADE CONTACT OR THROWN OBJECTS CAN CAUSE SERIOUS INJURY OR DEATH.

15503-C

19924-B

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿WARNING￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Check for leaks with cardboard; never use hand.Before loosening fittings: lower load, release pressure, and￿be sure oil is cool.Consult physician immediately if skin penetration occurs.

17 - PN 1004114

DANGER

If shaft connection is visible, shield is missing. Replace shield before

operating equipment. 1004114

12 Safety MAN0962 (1/9/2012)