DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
(Dealer Responsibility)
___ | Inspect the Mow'n Machine and attachments |
| thoroughly after assembly to be certain it is set up |
| properly before delivering it to the customer. |
___ | The following check lists are a reminder of points |
| to inspect. Check off each item as it is found sat- |
| isfactory or after proper adjustment is made. |
___ | Check that all safety shielding and decals are |
| properly installed and in good condition. |
___ | Check all bolts to be sure they are tight. |
___ | Check that all cotter pins are properly installed. |
___ | Check that all gearboxes are serviced and are |
| not leaking. |
___ | Lubricate equipment as specified in lubrication |
| section. |
DELIVERY CHECK LIST
(Dealer Responsibility)
___ Point out safety features of cutter. Explain the importance and meaning of all safety decals and the potential hazards when not followed.
___ Explain to the customer that sweeper attachment requires the use of rear counterweights, as speci- fied in the counterweight chart, to provide neces- sary tractor stability.
___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment.
___ Show customer how to make adjustments and select proper PTO speed.
___ Instruct customer how to lubricate equipment and explain importance of lubrication.
___ Show customer how to make sure driveline is properly installed and that
MAN0118 (Rev. 12/23/2004) | Dealer Check List 13 |
|
|