Woods Equipment FZ28K, FZ23B manual Dealer Check Lists, Pre-Deliverycheck List, Delivery Check List

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

Inspect the equipment thoroughly after assembly to make sure it is set up properly before delivering it to the customer. The following check list is a reminder of points to inspect. Check off each item as it is found sat- isfactory, corrections are made, or services are per- formed.

___	Check that all safety decals are installed and in
	good condition. Replace if damaged.
___	Check that all shields and guards are properly
	installed and in good condition. Replace if dam-
	aged.
___	Properly attach implement to power unit and
	make all necessary adjustments.
___	Check all bolts to be sure they are properly
	torqued.
___	Check that all cotter pins and safety pins are
	properly installed. Replace if damaged.
___	Check and grease all lubrication points.
___	Check the level of gearbox fluids before delivery.
___	Run unit immediately following set-up to double-
	check systems operation including hydrostatic
	neutral and safety switch system (page 11).
___	Check all fluid levels. See Lubrication, page 26.
___	Check tire pressure. See Drive Tire Pressure,
	page 26.

DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

___	Show customer how to make adjustments.
___	Instruct customer how to lubricate and explain
	importance of lubrication.
___	Point out the safety decals. Explain their meaning
	and the need to keep them in place and in good
	condition. Emphasize the increased safety haz-
	ards when instructions are not followed.
___	Present Operator's Manual and request that cus-
	tomer and all operators read it before operating
	equipment. Point out the manual safety rules,
	explain their meanings, and emphasize the
	increased safety hazards that exist when safety
	rules are not followed.
___	Show customer how to make sure driveline is
	properly installed and that spring-activated lock-
	ing pin or collar slides freely and is seated in
	groove on power unit PTO shaft.
___	Show customer the safe, proper procedures to be
	used when mounting, dismounting, and storing
	equipment.
___	Make customer aware of optional equipment
	available so that customer can make proper
	choices as required.

❖

28 Dealer Check Lists MAN0326 (12/28/2007)