Straight Line Travel
1.Check tire pressure; tires must have equal air pressure.
2.Check travel; drive forward with both steering handles full forward at half throttle.
•If travel is not straight, adjust steering handle stop bolt on opposite side of turn.
•If power unit turns to the left, raise steering stop bolt on the right.
•If power unit turns to the right, raise steering stop bolt on the left.
DP4
Figure 21. Left Side Steering Stop Bolts
INSTALL SINGLE TAILWHEEL (OPTIONAL)
1.Attach pivot mount adapter (1) to rear of power unit frame using two whiz screws (2) and lock nuts (3).
2.Attach pivot housing (4) to pivot mount adapter and power unit frame using four cap screws (5) and lock washers (6).
3.Torque hardware to 38
4.Inflate tire to 18 psi.
1.Pivot mount adapter
2.3/8 NC x
4.Pivot housing
5.3/8 NC x
6.3/8 Lock washer
Figure 22. Single Tailwheel Installation
❖
MAN0875 (2/8/2011) | Assembly 27 |
|
|
