Woods Equipment L36, L59 manual Parts, L306 Casters

L306 Casters

REF	PART		QTY	DESCRIPTION
A	24095		-	L306 Caster assembly bundle
1	13400		1	Caster assembly
2	15638		1	10" Caster wheel with sleeve
3	23857		1	Caster wheel yoke assembly
4	13435		1	Caster arm assembly
5	13444		1	Left caster adjustment bracket
6	13444		1	Right caster adjustment bracket
7	1972	*	1	1/4 - 28 Straight thread grease fitting,
				15/32" L
8	21020		1	1/4 x 1-1/4 Spirol pin -or-
8	1285	*	1	1/4 x 1-1/2 Cotter pin
9	-----	*	1	Straight 1/4 self-tapping grease fitting
				(for steel wheel) -or-
9	195	*	1	Straight 1/8P thread grease fitting
				(for polyethylene wheel)
10	976	*	1	3/8 NC x 1-1/2 HHCS GR5
11	838	*	1	3/8 Standard lock washer
12	835	*	1	3/8 NC Hex nut, plated
13	11900	*	3	1/2 NC Flanged hex lock nut
14	24576		2	1/2 NC x 1-3/4 HHCS GR5
15	23479		1	1/2 NC x 5 HHCS GR5
16	29368	c	1	1/2 x 3/4 OD x 3-3/8 Sleeve, HT -or-
16	12242	c	1	17 GA Wall x 5/8 OD x 3-3/8 tube
17	29375	b	2	3/4 Bore flanged bearing for 1-1/8
				hole -or-
17	4228	b	2	5/8 Bore flanged bearing for 1-3/8
				hole -or-
17	2905	b	2	5/8 Bore flanged bearing for 1-1/8
				hole -or-
17	65578	b	2	3/4 Bore x 1.385 flanged wheel bear-
				ing with groove

*Standard hardware, obtain locally

aFor proper caster arm identification, refer to dimension “L” as shown on drawing. The caster arms may be used on either side to obtain best fit.

bMeasure old bearing.

cMeasure outside diameter of old sleeve.

28 Parts 29936 (Rev. 5/18/2007)