NOTE: Make sure handle will not protrude into rear window of a tractor equipped with cab by checking the highest 3-point hitch position.

1.

Clevis Rotator

11.

3/8 Lock Washer

2.

Block

12.

3/8 NC x 1 HHCS

3.

Clevis Tube

13.

5/16 x 1-3/4 Roll Pin

4.

Hand Crank

14.

Trim Strip 6.5"

5.Mount Bracket

6.5/16 x 2 Roll Pin

7.5/16 NC x 1-1/2 HHCS

8.5/16 NC x 1 Carriage Bolt

9.5/16 NC Lock Nut

10.Rotator Shield

Figure 18. Hand Crank Installation

13.Apply grease to discharge tube ring and frame.

Figure 19. Apply Grease to Discharge Chute Ring

14.Loosen discharge chute hardware and remove washers. Washers will not be reused.

Install Discharge Chute (Figure 20)

15.Attach discharge chute (8) to chute base using spacers (35), (6 total, 3 each side), discharge chute clamp (40), and hardware.

NOTE: Refer to Figure 20 for proper orientation and installation of hardware.

16.Install two cap screws (5) through front two holes of discharge chute (8) and discharge chute spac- ers (35). Secure with nuts (28). Leave hardware loose.

17.Install six cap screws (27) through discharge chute clamp (40), discharge chute spacers (35) and dis- charge chute (8). Secure with nuts (28).

18.Tighten hardware.

19.Operate hand crank to check ease of block and pin and chute rotation. If hand crank turns too hard, adjust mounting bracket for a reduced angle. If chute does not rotate freely check spacers and chute hardware for binding.

5.3/8 NC x 1-1/2 HHCS GR5

8.Discharge Chute

27.3/8 x 1-1/4 HHCS GR5

28.3/8 NC Hex Locknut

35.Discharge Chute Spacer

40.Discharge Chute Clamp

Figure 20. Install Discharge Chute

22Assembly

(Rev. 10/4/2011)

MAN0869 (04/13/2011)

Page 22
Image 22
Woods Equipment SB74S, SB84S, SB54S, SB64S manual Install Discharge Chute Figure

SB84S, SB54S, SB74S, SB64S specifications

Woods Equipment Company has established itself as a leader in the manufacturing of high-quality landscape equipment, and the SB series of landscape rakes—specifically the SB64S, SB74S, SB54S, and SB84S—stand out for their exceptional performance and innovative features.

The SB series is designed to meet the needs of both residential and commercial users. These models range in width from 54 inches to 84 inches, allowing for versatility in handling various tasks, whether you're maintaining a small garden or clearing a large lot. The difference in size also caters to different tractor sizes and horsepower ratings, making it easier for users to select a rake that fits their specific requirements.

A notable feature of the SB series is its durable construction. Built from high-strength steel, these rakes can withstand rigorous use in various environments. The rakes are further equipped with heavy-duty tines that are engineered to be resilient against breakage while providing optimal soil leveling and debris clearing performance.

The SB rakes utilize a patented Quick-Tatch mounting system. This system allows for fast and easy attachment and detachment from tractors, reducing downtime and enhancing productivity. Additionally, the rakes can be adjusted to various angles, enabling users to efficiently handle different tasks such as grading, levelling, or scarifying soil.

One of the key characteristics of the SB64S, SB74S, SB54S, and SB84S models is their ergonomic design. The rakes are built with user-friendly controls that facilitate operation. Operators can change the angle and height with ease, which contributes to overall efficiency while reducing the physical strain typically associated with manual adjustments.

The rakes also feature a heavy-duty frame that supports consistent performance across various job conditions, whether working on flat ground or uneven terrains. Enhanced stability during operation means users can trust that the rake will provide uniform results without compromising the integrity of the landscape.

Another technological advantage of the SB series is its versatility in compatible attachment options, which allows users to employ the rake for various applications beyond standard landscaping, including gravel leveling and road maintenance.

In conclusion, the Woods Equipment SB64S, SB74S, SB54S, and SB84S rakes offer a combination of strength, technology, and user convenience, making them essential tools for landscape management. Their wide range of sizes and features ensures that there is a suitable option for every need, allowing for efficient and effective work across diverse environments.