DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(Dealer Responsibility)

Inspect the equipment thoroughly after assembly to ensure it is set up properly before delivering it to the customer.

The following check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.

___ Check that all safety decals are installed and in good condition. Replace if damaged.

___ Check that shields and guards are properly installed and in good condition. Replace if dam-

 

aged.

___

Check all bolts to be sure they are tight.

___

Check that all cotter pins and safety pins are

 

properly installed. Replace if damaged.

___

Check and grease all lubrication points as identi-

 

fied in "Service, lubrication information".

___

Check the level of gearbox fluids before delivery.

 

Service, if required, as specified in the "Service,

 

lubrication information."

DELIVERY CHECK LIST

(Dealer Responsibility)

___ Show customer how to make adjustments and select proper PTO speed.

___ Instruct customer how to lubricate and explain importance of lubrication.

___ Point out the safety decals. Explain their meaning and the need to keep them in place and in good condition. Emphasize the increased safety haz- ards when instructions are not followed.

___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.

___ Show customer how to make sure driveline is properly installed and that spring-activated lock- ing pin or collar slides freely and is seated in groove on tractor PTO shaft.

___ Explain to customer the potential crushing haz- ards of going underneath raised equipment. Instruct customer that service work does not require going underneath unit and never to do so.

___ Point out the correct mounting and routing of hydraulic hoses. Explain that during operation, mounting, dismounting and storage, care must be taken to prevent hose damage from pulling, twist- ing and kinking.

___ Show customer the safe, proper procedures to be used when mounting, dismounting, and storing equipment.

___ For mounted units, add wheel weights, ballast in front tires, and/or front tractor weight to enhance front end stability. A minimum 20% of tractor and equipment gross weight must be on front tractor wheels. When adding weight to attain 20% of tractor and equipment weight on front tractor wheels, you must not exceed the ROPS weight certification. Weigh the tractor and equipment. Do not estimate!

___ Make customer aware of optional equipment available so that customer can make proper choices as required.

___ Point out all guards and shields. Explain their importance and the safety hazards that exist when not kept in place and in good condition.

26 Dealer Check Lists

MAN0869 (04/13/2011)

 

 

Page 25 Page 27
Page 26
Image 26
Woods Equipment SB74S, SB84S, SB54S, SB64S manual Dealer Check Lists, PRE-DELIVERY Check List, Delivery Check List
Page 25 Page 27

SB84S, SB54S, SB74S, SB64S specifications

Woods Equipment Company has established itself as a leader in the manufacturing of high-quality landscape equipment, and the SB series of landscape rakes—specifically the SB64S, SB74S, SB54S, and SB84S—stand out for their exceptional performance and innovative features.

The SB series is designed to meet the needs of both residential and commercial users. These models range in width from 54 inches to 84 inches, allowing for versatility in handling various tasks, whether you're maintaining a small garden or clearing a large lot. The difference in size also caters to different tractor sizes and horsepower ratings, making it easier for users to select a rake that fits their specific requirements.

A notable feature of the SB series is its durable construction. Built from high-strength steel, these rakes can withstand rigorous use in various environments. The rakes are further equipped with heavy-duty tines that are engineered to be resilient against breakage while providing optimal soil leveling and debris clearing performance.

The SB rakes utilize a patented Quick-Tatch mounting system. This system allows for fast and easy attachment and detachment from tractors, reducing downtime and enhancing productivity. Additionally, the rakes can be adjusted to various angles, enabling users to efficiently handle different tasks such as grading, levelling, or scarifying soil.

One of the key characteristics of the SB64S, SB74S, SB54S, and SB84S models is their ergonomic design. The rakes are built with user-friendly controls that facilitate operation. Operators can change the angle and height with ease, which contributes to overall efficiency while reducing the physical strain typically associated with manual adjustments.

The rakes also feature a heavy-duty frame that supports consistent performance across various job conditions, whether working on flat ground or uneven terrains. Enhanced stability during operation means users can trust that the rake will provide uniform results without compromising the integrity of the landscape.

Another technological advantage of the SB series is its versatility in compatible attachment options, which allows users to employ the rake for various applications beyond standard landscaping, including gravel leveling and road maintenance.

In conclusion, the Woods Equipment SB64S, SB74S, SB54S, and SB84S rakes offer a combination of strength, technology, and user convenience, making them essential tools for landscape management. Their wide range of sizes and features ensures that there is a suitable option for every need, allowing for efficient and effective work across diverse environments.
Top Page Image Contents