OPERATION
The operator is responsible for the safe operation of this renovator. The operator must be properly trained. Operators should be familiar with the equipment, the tractor, and all safety practices before starting opera- tion. Read the safety rules and safety decals on page 5 through page 8.
Recommended tractor ground speed is from 2 to 5 mph.
Power unit must be equipped with ROPS or ROPS cab and seat belt. Keep seat belt securely fastened. Falling off power unit can result in death from being run over or crushed. Keep foldable ROPS system in “locked up” position at all times.
Never allow children or untrained persons to operate equipment.
Keep bystanders away from equipment.
Keep hands, feet, hair, and clothing away from equipment while engine is running. Stay clear of all moving parts.
CAUTION
Stop power unit and equipment immediately upon striking an obstruction. Turn off engine, remove key, inspect, and repair any damage before resuming operation.
Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy,
Super Turf Renovator Roller Operation
The Super Turf Renovator is an excellent turf recondi- tioning tool. Its ground penetration promotes a healthy root system by allowing water, air, and sunlight to enter the roots.
For best results, adjust the renovator level front to back so that the front and rear rollers work together. Control forward and backward pitch by adjusting the tractor's top link length.
Front Rollers
When the front rollers are straight (Figure 1) and the renovator is pulled forward, the large front pins will penetrate the soil in a straight pushing action, and little disturbance is caused to the turf.
DP6
Figure 1. Front Roller in Straight Position
The front rollers can be angled to promote a more aggressive tearing action of the turf. The more the angle, the more tearing action is applied by the front roller pins. For severe turf conditions, the maximum angle position may be desired (Figure 2).
DP7
Figure 2. Maximum Front Roller Position
Rear Rollers
The rear roller firms and presses soil kicked up by the front roller. This creates a uniform seedbed with the loose soil necessary for ensuring proper seed germina- tion. The spring tension on the rear roller can be
MAN0101 (Rev. 9/15/2006) | Operation 9 |
|
|
