Woodstock d3012-3016 instruction sheet Introduction, Inventory, Tools Required, Qty

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Materials Required

We stand behind our products! In the event that • Hardwood Stock (see Sizing Information for

questions arise about this product, please contact approximate dimensions). Woodstock International Technical Support at (360)

734-3482 or send e-mail to: tech-support@shopfox.biz.

COPYRIGHT © 2001 BY WOODSTOCK INTERNATIONAL, INC. REVISED JUNE, 2011 (JB)

Model D3012–D3016

Wood Clamp Hardware Kit

Instruction Sheet

Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz

Introduction

The Shop Fox Wood Clamp Hardware Kit provides all the necessary hardware to make your own wood clamp. Wood clamps are very handy during many woodworking applications. Wood jaws are non-marring and eliminate the need for pads, and two wood clamps can work together for a quick and easy bench vise. The jaws of the clamp should be made from a hardwood such as maple.

Be sure to read the entire instruction sheet before beginning the construction of the wood clamps. Follow every step and use the rec- ommended tools and supplies. Also, read the instruction manuals and follow all safety pre- cautions for any tools you are using to com- plete this project. Be certain that the tools used for this installation are intended for the task that will be performed. Failure to do this could result in serious personal injury.

Wear safety glasses during the entire assembly process. Failure to comply may result in serious personal injury.

Figure 1. Wood Clamp Hardware Kit.
Inventory
Item	Qty.
Wooden Handles	2
Threaded Clamp Rods	2
Handle Pins	2
Dowel Nuts (Right-Hand Threads)	2
Dowel Nuts (Left-Hand Threads)	2

Tools Required

•Saw (Hand Saw, Bandsaw, Table Saw or Jig Saw)

•Drill Press/Drill Bit Set

•Ball Peen Hammer

•Sandpaper

Printed in China